The CM Cyclone hand chain hoist features superior engineering, efficiency, and durability and is considered one of the most popular hand chain hoists ever designed. Most interchangeability of parts in the industry. High-strength aluminum alloy castings in frame and covers. Inspected over 75 times to meet or exceed HMI and ASME/ANSI performance and safety standards. Standard hand chain drop is 2 ...

• Standard load limiter for simple, automatic overload protection
• Enclosed contoured Weston-type automatic brake for positive load control
• High-efficiency spur gearing for greater lift with minimum effort
• Rugged hoistaloy chain for added strength and durability
• Fully machined, forged liftwheel pockets for easier lifting and smooth free chaining

Manufacturer: Columbus McKinnon

The Elephant Lifting FA Series FA-3-15-230V hoist is a single-speed, three-phase electric chain hoist with a hook mount, a 2.18-horsepower motor with a 230V/60Hz power input. It is fully enclosed within a powder-coated steel plate housing that is suitable for indoor or outdoor applications, and has a 6600 lb. lift capacity, a 15' lift, and an 8 feet per minute (fpm) lift ...

• Single-speed electric chain hoist with a hook mount and a three-phase motor, and fully enclosed within powder-coated steel plate housing that is suitable for indoor or outdoor applications
• 2.18 -horsepower insulated motor with a 230V/60Hz power input
• Case-hardened grade 80 steel load chain has been mechanically galvanized to resist corrosion
• Electro-magnetic DC brake to stop and hold a load while generating minimal friction heat
• ANSI/ASME H3 duty cycle classification typically for general machine shop fabricating, assembly, storage, and warehousing, with loads and use randomly distributed; hoist body has IP54 Ingress Protection rating for protection from dust and water spray

Manufacturer: Elephant Lifting Products USA

The Harrington Cheetah TCS is an air-powered, adjustable speed hoist with a cord control that allows the operator to stay within reach of the load; hook mount, cast-aluminum body, and unlimited duty cycle for continuous operation in high-volume production environments; and a spring-loaded, eight-vane motor with air feathering control to facilitate precise load handling and ...

• Air-powered, adjustable speed hoist with cord control that allows operator to stay within reach of the load
• Hook mount, cast-aluminum body, and unlimited duty cycle for continuous operation in high-volume production environments
• Spring-loaded, eight-vane motor with air feathering control to facilitate precise load handling and gentle load placement
• Average decibel rating of 80dBA for comfortable noise levels
• External speed adjustment screw can be set without tools

Manufacturer: Harrington Hoists, Inc

The Elephant Lifting SA Series SA-3-20 hoist is a single-speed, single-phase electric chain hoist with a hook mount, a 1.21-horsepower insulated motor with a 115V/60Hz power input. It is fully enclosed within a powder-coated steel plate housing that is suitable for indoor or outdoor applications, and has a 6600 lb. lift capacity, a 20' lift, and a 3.3 feet per minute (fpm) ...

• Single-speed electric chain hoist with a hook mount and a single-phase motor, and fully enclosed within powder-coated steel plate housing that is suitable for indoor or outdoor applications
• 1.21 -horsepower insulated motor with a 115V/60Hz power input
• Case-hardened grade 80 steel load chain has been mechanically galvanized to resist corrosion
• Electro-magnetic DC brake to stop and hold a load while generating minimal friction heat
• ANSI/ASME H3 duty cycle classification typically for general machine shop fabricating, assembly, storage, and warehousing, with loads and use randomly distributed; hoist body has IP54 Ingress Protection rating for protection from dust and water spray

Manufacturer: Elephant Lifting Products USA

Budgit Manguard Hoists are designed for H4 duty, which means most heavy-duty industrial applications. Budgit's range of specifications and features have made it the perfect solution for thousands of hoists sold in industries such as automotive, machine shops, chemical plants, marine etc.

• Gearing totally enclosed in oil-bath lubrication for long life, High-torque H4 rated heavy duty motor with Class 'F' insulation with thermal actuated switches embedded in the motor winding for protection from overheating
• Weatherproof NEMA-4X enclosed push-button control station, Paddle type upper and lower control limit switch
• Powder coat finish provides long lasting durable finish and added resistance to corrosive environments
• Manguard overload protection prevents lifting excessive loads
• All hoists are built in compliance to ASME/ANSI B30.16 & ISO certified and NEC electrical codes
• Does not linclude load brake
• 5 feet of power supply cord
• 46 feet pendant drop

Manufacturer: Columbus Mckinnon Corp.

CM Man Guard is designed for a long and dependable service life for heavy duty applications. With its enhanced safety features, easy access to key components, less maintenance, and CM Man Guard is the right choice for your lifting needs. Class F insulation and thermal switch in motor winding reduces motor overheating. Helical Gears are oil bath lubricated which provides better wear while reducing ...

• Overload clutch prevents lifting beyond load capacity, which may damage the hoist or supporting structure or cause injury to the operator
• H4 duty motor classification rated for heavy duty use
• Open design allows quick access to AC brake, easy access to control panel and simple wiring change to switch voltages
• Variable frequency drive (VFD) with 3 step infinitely variable pendant allows operator to adjust lifting speeds without interruption
• Efficiently designed gear train allows a smaller horsepower motor to operate at the same speeds and duty as our competition and reduces energy consumption

Manufacturer: Columbus McKinnon

CM Man Guard is designed for a long and dependable service life for heavy duty applications. With its enhanced safety features, easy access to key components, less maintenance, and CM Man Guard is the right choice for your lifting needs. Class F insulation and thermal switch in motor winding reduces motor overheating. Helical Gears are oil bath lubricated which provides better wear while reducing ...

• Overload clutch prevents lifting beyond load capacity, which may damage the hoist or supporting structure or cause injury to the operator
• H4 duty motor classification rated for heavy duty use
• Open design allows quick access to AC brake, easy access to control panel and simple wiring change to switch voltages
• Variable frequency drive (VFD) with 3 step infinitely variable pendant allows operator to adjust lifting speeds without interruption
• Efficiently designed gear train allows a smaller horsepower motor to operate at the same speeds and duty as our competition and reduces energy consumption

Manufacturer: Columbus McKinnon

The Elephant Lifting FA Series FA-3-10 hoist is a single-speed, three-phase electric chain hoist with a hook mount, a 2.18-horsepower motor with a dual voltage 230V/460V/60Hz power input. It is fully enclosed within a powder-coated steel plate housing that is suitable for indoor or outdoor applications, and has a 6600 lb. lift capacity, a 10' lift, and an 8 feet per minute ...

• Single-speed electric chain hoist with a hook mount and a three-phase motor, and fully enclosed within powder-coated steel plate housing that is suitable for indoor or outdoor applications
• 2.18 -horsepower insulated motor with a dual voltage 230V/460V/60Hz power input
• Case-hardened grade 80 steel load chain has been mechanically galvanized to resist corrosion
• Electro-magnetic DC brake to stop and hold a load while generating minimal friction heat
• ANSI/ASME H3 duty cycle classification typically for general machine shop fabricating, assembly, storage, and warehousing, with loads and use randomly distributed; hoist body has IP54 Ingress Protection rating for protection from dust and water spray

Manufacturer: Elephant Lifting Products USA

EHLT Series full featured electric hydraulic scissor lift tables are used by all types of manufacturing and warehouse facilities. Safety features include: electric toe guard to protect pinch points during lowering of the table, brass velocity fuse to maintain platform height regardless of hydraulic pressure, 24V AC push-button hand control, maintenance prop and upper travel limit switch to stop ...

• This product is intended strictly for use in professional and industrial environments. Customer must determine whether this product complies with requirements applied where the product will be used

Manufacturer: Vestil Manufacturing Corp

Harrington SNER series of electric chain hoists furnishes single-phase operation in a heavy-duty, low-headroom design. It easily transports any load. Look to this model when high quality and convenience are important for the job. Extreme duty motor higher horsepower and top duty ratings provide increased performance. Pull-rotor motor brake extremely durable and reliable, this advanced design has ...

• Extreme duty motor higher horsepower and top duty ratings provide increased performance
• Pull-rotor motor brake extremely durable and reliable, this advanced design has no brake coil to fail
• Unique chain guide provides quiet and smooth guiding of chain
• Easily removed without disassembly of hoist
• Heavy cast iron construction for improved wear

Manufacturer: Harrington