This thermal CPU paste can be used to improve the effectiveness of a CPU cooler by thermally bonding the CPU to the heatsink, allowing the heatsink and fan to work at their full capacity to remove the harmful heat away from the CPU.

• Improves the heat transfer between a CPU and heatsink to keep the CPU running cooler
• Effectively fills surface imperfections on CPU to prevent air pockets and help heat transfer
• Ceramic based compound that is electrically non-conductive for safe use around electronics
• Ceramic-based compound containing silicone
• Thermal conductivity of more than 1.066 W/m-K

Manufacturer: Startech

Finding a quiet and efficient cooling fan is the ultimate goal for every enthusiast. The FF121B is a fan grille designed for easy installation with any 120mm fan. The honeycomb pattern on the grille not only reduces wind shear noise but also channels the airflow into more focused beam. Its integrated filter also provides reduced dust buildup to extend the life cycle of components. All in all, the ...

• Honeycomb grill increases airflow focus
• Integrated filter provides class leading dust reduction
• Compatible with all standard 120mm fans
• Include 4 screws

Manufacturer: Silverstone

Rosewill RFA-120-K 120mm Case Fan

• Dimensions: 120 x 120 x 25mm
• RPM: 2000 RPM
• Air Flow: 74.48 CFM

Manufacturer: Rosewill

Our thermal CPU paste improves the effectiveness of CPU coolers by thermally bonding the CPU to the heatsink. A high quality metallic solution that helps to ensure maximum dissipation of heat generated by the CPU for optimized performance and greater system stability; and is more effective than standard silicon-based heat grease/CPU paste, providing optimum protection against CPU heat damage.

• Better thermal conductivity over standard silicon-based compounds and negligible electrical conductivity for effective and safe use in high performance applications
• Metal-based compound containing metal oxide
• Thermal conductivity of more than 1.93 W/m-K
• Negligible electrical conductivity
• Stable performance over a wide temperature range
• 4-6 applications per tube
• Resealable syringe applicator

Manufacturer: StarTech.com

Case cooling is becoming more essential these days. The better airflow inside your system, the cooler and more stable system you will get.

• Higher air flow to enhance cooling performance
• Ball bearing for longer life expectancy
• Silent operation for case cooling
• RoHS Compliance
• 2500 rpm

Manufacturer: Cooler Master USA, Inc.

Cooler Master HTK-002 thermally conductive compounds are grease-like silicone materials, heavily filled with heat conductive metal oxides. This combination promotes high thermal conductivity, low bleed and high-temperature stability. These compounds resist changes in consistency at temperatures up to 177°C (350°F), maintaining a positive heat sink seal to improve heat transfer from the ...

• Suitable for CPU, chipsets on Mainboard, VGA card, etc.
• Easy to use.
• Zif Socket Templates ensure correct applying area with various CPU socket types.
• Produces an even layer when using applicator.
• Wide range of application temperature.

Manufacturer: Cooler Master USA, Inc.

MassCool FD08025S1M3-4 80mm 3&4-Pin Sleeve Case Fan

• Bearing: Sleeve bearing
• Rated Voltage: 12 V DC
• Noise level: 26.5 dBA
• Air flow: 32.95 CFM at 2,700 RPM
• Connector: 3-Pin (connect to mainboard)/4-Pin (connect to power supply)

Manufacturer: MassCool

Dust can be a computer system's worst enemy as it has the potential to lower cooling performance or cause damage when left overly accumulated. But most fan filters are a hassle to install so SilverStone created an easy to use FF122 fan filter. The FF122 has embedded magnet in its frame so it can be effortlessly attached to any steel chassis without tools. In addition to filtering dust, the FF122's ...

• Convenient magnetized design for easy installation
• Fine filter provides great dust reduction properties
• Compatible with most 120mm fans or vents
• High density ABS / magnet
• 120mm fan grill and filter kit

Manufacturer: Silverstone Tek

MassCool SF-800-3B 80mm 3/4-Pin Ball Bearing 3 & 4-Pin Connector With 5.08mm Pitches Between Wires Case Fan

• Rate Voltage: DC 12V
• Fan Speed: 2200 rpm
• Air Flow: 27 CFM, Max 29 CFM
• Noise Level: 27.50 dBA, Max 29 dBA
• Bearing Type: One Ball Bearing
• Connector: 3 & 4-Pin Connector With 5.08mm Pitches Between Wires

Manufacturer: MassCool

This 80mm PC case fan is an economically-priced add-in cooling fan designed to provide efficient cooling for your PC. Able to exhaust warm air out, or circulate cool air into the case, the PC case fan can help eliminate overheated components and maintain peak performance within your system. Featuring an Ever-Lubricate bearing design for longer life beyond similar featured sleeve bearing models, ...

• Ever Lubricate bearing design offers superior life versus traditional sleeve bearing designs
• Backed by a StarTech.com 2-year warranty and free lifetime technical support
• Designed for quiet operation/low noise
• Ever Lubricate bearing design

Manufacturer: Startech