Manufacturer: Barbarian Basketball Systems

The Micca-Hywell 85 Mbps powerline Ethernet network adapter kit is the affordable solution to providing network connectivity to locations without unsightly wires. No complex installation needed, no software to install, and nothing to configure. Just plug the adapters into AC wall sockets, one at the source and one at the destination, and a network link is quickly established ...

• Works over power line voltages of 85V-265V 50/60Hz
• Advanced QAM 256/64/16,DQPSK,DBPSK and ROBO modulation
• HomePlug Turbo 1.0 compatible
• 56-bit DES Link Encryption with key management for security
• Integrated Quality of Service (QoS) features

Manufacturer: Barbarian Basketball Systems

The Barbarian was developed to not only withstand the strongest slam dunks in the world, but also the young basketball stars of tomorrow. with the help of world class engineers, the Barbarian is the true world leader in basketball goal design and performance. The Barbarian has the ability to adjust from 5.5 feet (the lowest height of any adjustable basketball goal available, perfect for young ...

• ? 100 percent made in the USA by top notch American workers.
• ? Steel reinforced backboard with upper stabilizing arms. The full steel frame is around the entire backside of the backboard and the shooting square providing a superior rebound to any other system.
• Powder-coated steel not paint. We Zinc powder coat before our final black powder coat for extra rust protection.
• ? 1/2" clear acrylic or 1/2" tempered glass backboards, much thicker than the 3/8" offered by most manufacturers, providing a far better rebound to any other system.
• ? Backboard pad and pole included.

Manufacturer: Barbarian Basketball Systems

The Barbarian was developed to not only withstand the strongest slam dunks in the world, but also the young basketball stars of tomorrow. with the help of world class engineers, the Barbarian is the true world leader in basketball goal design and performance. The Barbarian has the ability to adjust from 5.5 feet (the lowest height of any adjustable basketball goal available, perfect for young ...

• ? 100 percent made in the USA by top notch American workers.
• ? Steel reinforced backboard with upper stabilizing arms. The full steel frame is around the entire backside of the backboard and the shooting square providing a superior rebound to any other system.
• Powder-coated steel not paint. We Zinc powder coat before our final black powder coat for extra rust protection.
• ? 1/2" clear acrylic or 1/2" tempered glass backboards, much thicker than the 3/8" offered by most manufacturers, providing a far better rebound to any other system.
• ? Backboard pad and pole included.

Manufacturer: Barbarian Basketball Systems

The Barbarian was developed to not only withstand the strongest slam dunks in the world, but also the young basketball stars of tomorrow. with the help of world class engineers, the Barbarian is the true world leader in basketball goal design and performance. The Barbarian has the ability to adjust from 5.5 feet (the lowest height of any adjustable basketball goal available, perfect for young ...

• ? 100 percent made in the USA by top notch American workers.
• ? Steel reinforced backboard with upper stabilizing arms. The full steel frame is around the entire backside of the backboard and the shooting square providing a superior rebound to any other system.
• Powder-coated steel not paint. We Zinc powder coat before our final black powder coat for extra rust protection.
• ? 1/2" clear acrylic or 1/2" tempered glass backboards, much thicker than the 3/8" offered by most manufacturers, providing a far better rebound to any other system.
• ? Backboard pad and pole included.

Manufacturer: Barbarian Basketball Systems

The Barbarian was developed to not only withstand the strongest slam dunks in the world, but also the young basketball stars of tomorrow. With the help of world class engineers, the Barbarian is the true world leader in basketball goal design and performance. The Barbarian has the ability to adjust from 5.5 feet (the lowest height of any adjustable basketball goal available, perfect for young ...

• 100 percent made in the USA by top notch American workers.
• Steel reinforced backboard with upper stabilizing arms. The full steel frame is around the entire backside of the backboard and the shooting square providing a superior rebound to any other system.
• Powder-coated steel not paint. We Zinc powder coat before our final black powder coat for extra rust protection.
• 1/2" clear acrylic or 1/2" tempered glass backboards, much thicker than the 3/8" offered by most manufacturers, providing a far better rebound to any other system.
• Backboard pad and pole included.

Manufacturer: Barbarian Basketball Systems

The Spalding 88724AAP features a 72"x42" steel framed acrylic backboard. The backboard has a 4" offset from its single piece, 8" square pole. The U-Turn Pro lift system with removable crank allows infinite height adjustment from 7' - 10' and featurs a safety stop preventing it from going below 6'6". The board features Z-Arms for impoved stability and leveling, reducing board breakage. The ...

• 72" steel framed acrylic backboard with aluminum trim
• 1/2" thick acrylic backboard
• 180° Breakaway rim for professional level performance
• U-Turn Pro system provides infinite height adjustment from 7' to 10'
• Board has 4' offset from pole

Manufacturer: Spalding

The 72" Stadium Glass system is made up of state-of-the-art technolgies for home use. This includes 2 sheets of tempered glass fused together with a thin layer of adhesive, creating superior rebound while ensuring the safety of players if the backboard were to be damaged. The Pro Flex rim is mounted directly to the reinforced lower backboard frame bar. The Power Glide Steel Cylinder System ...

• Includes Pole, Backboard, Arm Support, and Flex Rim
• 72" x 42" fused tempered glass with clear shot backboard design. Premium Pro Flex 5/8" thick steel rim
• Power glide system adjusts rim from 7'6" to 10'
• 6" square steel 3/16" thick pole with 8 welded gussets
• All pivot points utilize welded steel encasements

Manufacturer: Wilson

The unmatched craftsmanship, durability, and performance of the Goalsetter MVP have made it the industry's premier playground basketball goal. The MVP system offers a massive 6" square offset mast with 3/16" wall thickness and full 4' x 6" square ground anchor for ultimate stability. The competition size 42" x 72" Acrylic backboard exceeds the demands of today's outdoor playgrounds and provides ...

• Internal Compression Height Adjustment Mechanism allows rim height to raise and lower 6' to 10' and increases hoop safety with no pinch or grab points
• Off-Set 6" square one-piece steel pole with seven-gauge (3/16") wall thickness minimizes shake and aids in reducing wear and tear on joints of the system and provides a 4ft Extension from wall to front of backboard
• Backboard is 42" x 72" and made of 3/8" acrylic mounted on an exclusive H-Frame design made of 1-1/2" structural steel tubing to provide precise and consistent ball response
• Corrosion-Resistant paint process of one primer coat and two coats of baked on acrylic-enamel provides a high-gloss finish
• Ground Anchor Hinge System is an exclusive Goalsetter design that enables easy installation of the goal system without the use of scaffold or ladders

Manufacturer: Goalsetter

The original goal in the Goalsetter line-up, the Goalsetter MVP stands alone. The MVP's standard regulation size Tempered GLASS 42" x 72" Competition backboard, 6" square structural steel, off-set, one-piece pole, and spacious 4' regulation play area make the MVP your choice for serious driveway or backyard play. Adjustable from 6' to 10', the internal height adjustment mechanism enhances safety ...

• Internal Compression Height Adjustment Mechanism allows rim height to raise and lower 6' to 10' and increases hoop safety with no pinch or grab points
• Off-Set 6" square one-piece steel pole with seven-gauge (3/16") wall thickness minimizes shake and aids in reducing wear and tear on joints of the system and provides a 4ft Extension from wall to front of backboard
• Backboard is 42" x 72" and made of 3/8" competition fully-tempered glass mounted on an exclusive H-Frame design made of 1-1/2" structural steel tubing to provide precise and consistent ball response
• Corrosion-Resistant paint process of one primer coat and two coats of baked on acrylic-enamel provides a high-gloss finish
• Ground Anchor Hinge System is an exclusive Goalsetter design that enables easy installation of the goal system without the use of scaffold or ladders

Manufacturer: Goalsetter