Whether you are a do it yourselfer working out of your garage, operate a small auto repair business, or taking care of equipment and engine repairs at the ranch or farm, your going to need a parts washer to remove the grease and grime from the engine components. You’re going to need Black Bull 3.5 Gallon Portable Parts Washer. This 5 gallon parts washer with a 3.5 gallon solvent capacity is ...

• Removes grease, grime and oil from engine components, oil pans, carburetors and more, small size is easily to transport
• Convenient removable tray with drainage holes, flexible chrome plated nozzle adjusts for full coverage
• 5 gal. tank capacity / 3.5 gal. solvent capacity, 120 Volts / 60 Hz water pump, fusible link arm and steel lid
• Max. Pump output: 22 gph flow rate (with flexible pipe), max. Pump output: 210 gph flow rate (without flexible pipe), recirculates .3gpm of solvent
• Rated voltage 120 Volt / 60 Hz; overall dimensions: 18 inch W x 9 inch H x 13.5 inch D

Manufacturer: Black Bull

Torin Jack Part Washer is 3.5 gallon compact size and has a 3.5 gallon fluid reservoir. Perfect for small parts cleaning and approved for use with mineral spirits and biodegradable cleaners. The super handy bench top unit fits almost anywhere, and is great for most cleaning jobs, wheel bearings, gears and carburetors. The pump recycles at 1/2 gallon per minute. Durable steel cabinet construction ...

• Compact Size
• Perfect for small parts cleaning
• Durable steel cabinet construction
• Use with mineral spirits and biodegradable cleaners
• Handy bench top

Manufacturer: Torin

D-ring/shackle washers (set of 8), red.

• D-ring washers
• Prevents rattles
• Fits standard 3/4" d-rings or shackles
• Limited lifetime warranty
• Includes enough washers to do four d rings

Manufacturer: Daystar

Whether you are a do it yourselfer working out of your garage, operate a small auto repair business, or taking care of automotive and engine repairs at the ranch or farm, your going to need a parts washer to remove the grease and grime from the engine components. You’re going to need a Black Bull 20 Gallon Parts Washer. This 20 gallon parts washer with a 12 gallon solvent capacity can clean ...

• Removes grease, grime and oil from engine components, oil pans, carburetors , Fully enclosed electric pump recirculates fluid for quick parts washing
• Steel construction, removable work shelf, fire safety lid w/fusible-link, nozzle adjusts for full coverage, on/off switch with indicator light
• Rated voltage: 120v / 60 hz / 0.5a; 120 volts / 60 hz water pump, Pump output: 192 gph flow rate (with flexible pipe)
• Max. Pump output: 318 gph flow rate (w/o flexible pipe), recirculates 2.6-3.2 gpm of solvent, Maximum output through spigot: 2.64-3.1 gallons/min
• 20 gal tank capacity/12 gal solvent capacity max; overall: 30 inch W x 21 1/4 inch D x 34 5/8 inch H; Tank: 28 inch W x 19 inch D x 10.25 inch H

Manufacturer: Black Bull

Seamless and round corner construction

• 110 Volt pump with 135 gallons/min. output
• Tank Capacity: 5 Gallon
• Solvent Capacity: 3.5 Gallon
• Dimensions: 15" L x 12" W x 9" H

Manufacturer: ATD

D-ring/shackle washers (set of 8), black.

• D-ring washers
• Prevents rattles
• Fits standard 3/4" d-rings or shackles
• Limited lifetime warranty
• Includes enough washers to do four d rings

Manufacturer: Daystar

Manufacturer: CRC

For performance plumbing connections that require a crushwasher, trying to re-use an old washer is not recommended. A crushwasher creates a seal specific to its application by deforming (crushing) as the connection is tightened. A new high quality crushwasher, like these Aeroquip crushwashers, can give you an excellent seal, but a used crushwasher has already been compressed, so it may not ...

• Always use a new crushwasher; for use with banjo fittings and carburetor adapters
• Made from aluminum to give you a good seal
• Size -03 replacement crushwasher
• Package contains 5 pieces
• 1 year limited manufacturer's warranty

Manufacturer: Aeroquip

1mm thick steel washer features 120V/60Hz pump that dispenses up to 18L/min.

• Tank dimensions: 46-1/8" x 22-1/4" x 13-1/16".
• Overall dimensions: 46-7/8" x 22-7/8" x 36-3/4".

Manufacturer: ATD

The 20 gallon parts washer will easily eliminate any grease or dirt found on all mechanical components. Made from rugged welded steel with a removable work shelf, this product ensures safety, with a lid that closes automatically in case of a fire or when the temperature reaches 180 degrees Celsius or higher. Tank capacity is 20 gallons and solvent capacity is 12 gallons. Overall dimensions are of ...

• Parts basket for snaking small parts in solvent
• Convenient removable work shelf and flexible nozzle
• Lid closes in one minute in case of fire or when temperature is 180 degree centigrade or higher
• Made from rugged welded steel
• Electric requirement of 110V/60Hz (240V/50Hz) solvent pump

Manufacturer: DuraWolf